Hydrodynamic performance of a T-shaped floating breakwater     

《Applied Ocean Research》2019

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.  相似文献   

Numerical assessment of tsunami attack on a rubble mound breakwater using OpenFOAM®     

《Applied Ocean Research》2018

A numerical assessment study of tsunami attack on the rubble mound breakwater of Haydarpasa Port, located at the southern entrance of the Istanbul Bosphorus Strait in the Sea of Marmara, Turkey, is carried out in this study using a Volume-Averaged Reynolds-Averaged Navier-Stokes solver, IHFOAM, developed in OpenFOAM^® environment. The numerical model is calibrated with and validated against the data from solitary wave and tsunami overflow experiments representing tsunami attack. Furthermore, attack of a potential tsunami near Haydarpasa Port is simulated to investigate effects of a more realistic tsunami that cannot be generated in a wave flume with the present state of the art technology. Discussions on practical engineering applications of this type of numerical modeling studies are given focusing on pressure distributions around the crown-wall of the rubble mound breakwater, and the forces acting on the single stone located behind the crown-wall at the rear side of the breakwater. Numerical modeling of stability/failure mechanism of the overall cross-section is studied throughout the paper.The present study shows that hydrodynamics along the wave flume and over the breakwater can be simulated properly for both solitary wave and tsunami overflow experiments. Stability of the overall cross-section can only be simulated qualitatively for solitary wave cases; on the other hand, the effect of the time elapsed during tsunami overflow cannot be reflected in the simulations using the present numerical tool. However, the stability of the overall cross-section under tsunami overflow is assessed by evaluating forces acting on the rear side armor unit supporting the crown-wall of the rubble mound breakwater as a practical engineering application in the present paper. Furthermore, two non-dimensional parameters are derived to discuss the stability of this armor unit; and thus, the stability condition of the overall cross-section. Approximate threshold values for these non-dimensional parameters are presented comparing experimental and numerical results as a starting point for engineers in practice. Finally, investigations on the solitary wave and tsunami overflow experiments/simulations are extended to the potential tsunami simulation in the scope of both representation of a realistic tsunami in a wave flume and stability of the rubble mound breakwater.  相似文献   

Risk Analysis of Breakwater Caisson Under Wave Attack Using Load Surface Approximation     

Dong Hyawn KIM 《中国海洋工程》2014,(6):739-748

A new load surface based approach to the reliability analysis of caisson-type breakwater is proposed. Uncertainties of the horizontal and vertical wave loads acting on breakwater are considered by using the so-called load surfaces, which can be estimated as functions of wave height, water level, and so on. Then, the first-order reliability method（FORM） can be applied to determine the probability of failure under the wave action. In this way, the reliability analysis of breakwaters with uncertainties both in wave height and in water level is possible. Moreover, the uncertainty in wave breaking can be taken into account by considering a random variable for wave height ratio which relates the significant wave height to the maximum wave height. The proposed approach is applied numerically to the reliability analysis of caisson breakwater under wave attack that may undergo partial or full wave breaking.  相似文献   

柔性水囊潜堤消波特性的溃坝水槽试验研究     

陈本毅  赵西增  刘竹琴  周琪坤  卞婧 《海洋工程》2020,38(5):71-79

柔性水囊潜堤由橡胶制成，内部充水，具有结构简单、造价低廉等优点，能较好满足人工岛、跨海桥梁、海洋平台等基础设施建设工程对简单便携、拆装方便的临时防波堤的需求。为了探究柔性水囊潜堤的消波特性，在溃坝水槽内开展溃坝波与半圆柱形柔性水囊潜堤相互作用的试验研究，重点探究柔性水囊潜堤与溃坝波相互作用过程中水位变化特性，并与半圆柱刚性潜堤的性能进行比较；同时分析柔性水囊潜堤内部初始水压和浸没深度等参数对其消波性能的影响。结果表明：柔性水囊潜堤能够用作临时防波堤来衰减波浪；与半圆柱刚性潜堤相比，柔性水囊潜堤在降低溃坝波无量纲最大水位、提高消波性能方面更具优势；内部初始水压是影响柔性水囊潜堤消波性能的重要因素，适当降低内部初始水压，有利于增强柔性潜堤的变形程度，进而增加波能耗散，可获得更好的消波效果；而增加浸没深度即潜深，会使得柔性水囊潜堤对溃坝波的影响程度降低，消波效果减弱。  相似文献   

防浪建筑物影响下珊瑚礁海岸波浪传播变形试验     

贾美军  姚宇  陈松贵  郭辉群 《海洋工程》2020,38(6):53-59,123

通过测试一系列不规则波工况研究了防浪建筑物存在下珊瑚礁海岸附近短波、低频长波和增水的变化规律，并对比了防浪建筑物的不同位置情况。分析结果表明：波浪在沿礁传播过程中，短波波高沿礁坪持续衰减，低频长波波高沿礁坪逐渐增大，波浪增水则沿礁坪基本保持不变；海岸附近短波随着防浪建筑物与礁缘距离的变大而减小，低频长波则在防浪建筑物处于礁坪后部时达到最大，防浪建筑物位置的变化对于礁坪波浪增水的影响可以忽略。通过理论分析证明了珊瑚礁地形上低频长波是由于群波破碎造成的破碎点移动而产生的；当特定波况作用于特定位置的防浪建筑物时，低频长波在礁坪上会发生一阶共振效应导致其能量在海岸附近达到最大值。  相似文献   

Wave Attenuation Performance and the Influencing Factors of A Lower Arc-Plate Breakwater     

LI Xue-yan  WANG Qing  YOU Zai-jin  GUO Wei-jun  ZHANG Jun-bin  ZHAN Chao  ZHANG Zhi-chen  WANG Li-xue  LI Qin 《中国海洋工程》2020,(1):89-98

Comprehensive experimental and numerical studies have been undertaken to investigate wave energy dissipation performance and main influencing factors of a lower arc-plate breakwater. The numerical model, which considers nonlinear interactions between waves and the arc-plate breakwater, has been constructed by using the velocity wave- generating method, the volume of fluid (VOF) method and the finite volume method. The results show that the relative width, relative height and relative submergence of the breakwater are three main influencing factors and have significant influence on wave energy dissipation of the lower arc-plate open breakwater. The transmission coefficient is found to decrease with the increasing relative width, and the minimum transmission coefficient is 0.15 when the relative width is 0.45. The reflection coefficient is found to vary slightly with the relative width, and the maximum reflection coefficient is 0.53 when the relative width is 0.45. The transmission and reflection coefficients are shown to increase with the relative wave height for approximately 85% of the experimental tests when the relative width is 0.19 0.45. The transmission coefficients at relative submergences of 0.04, 0.02 and 0 are clearly shown to be greater than those at relative submergences of 0.02 and 0.04, while the reflection coefficient exhibits the opposite relationship. After the wave interacts with the lower arc-plate breakwater, the wave energy is mainly converted into transmission, reflection and dissipation energies. The wave attenuation performance is clearly weakened for waves with greater heights and longer periods.  相似文献   

北淮阳东段西汤池岩体地球化学特征、锆石U-Pb定年及成因     

杨义忠  王徽  蔡杨 《江苏地质》2018,42(2):187-196

西汤池岩体位于安徽北淮阳地区舒城县西汤池一带。西汤池似斑状二长花岗岩具高硅、富碱质特征,为铝饱和碱性系列岩石。稀土元素含量中等,(La/Yb)_N与HREE/LREE值较高,重稀土相对轻稀土亏损明显,Eu呈弱负异常,属轻稀土富集型。大离子亲石元素(Rb、K、La、Nd等)明显富集,而高场强元素(Nb、Ta、P、Ti等)亏损。通过LA-ICP-MS锆石U-Pb定年,获得西汤池二长花岗岩~(206)Pb/~(238)U年龄为(125.5±1.6)Ma,为早白垩世岩浆活动的产物。基于前人关于北淮阳地区区域地质背景方面的研究成果和本次地球化学构造环境判别方面的研究,认为西汤池二长花岗岩属A_1型花岗岩,形成于后碰撞的伸展构造环境。  相似文献   

张广才岭南段两个侏罗纪花岗岩体的地球化学特征及其地质意义     

句高  梁一鸿  孙晓  周静 《世界地质》2018,37(2):374-384

通过LA-ICP-MS锆石U-Pb定年和岩石化学分析,研究了张广才岭南段上营北岩体和帽儿山岩体的形成年代,地球化学特征和形成环境。上营北岩体为中粗粒钾长花岗岩,帽儿山岩体为中细粒黑云母钾长花岗岩。上营北岩体的加权平均年龄为178.9±2.7 Ma,帽儿山岩体为183.7±2.4 Ma,均为早侏罗世侵入岩。上营北岩体和帽儿山岩体主量元素都具有Si O_2和K_2O含量较高,Ti O_2、Mg O、Ca O含量较低,TFe O/Mg O值较高的特点;上营北岩体A/CNK=0.98~1.08,里特曼指数σ=1.51~2.66;帽儿山岩体含铝指数A/CNK=1.00~1.01,里特曼指数σ=2.12~2.36。上营北岩体稀土元素配分模式为海鸥型,轻重稀土分馏不明显;帽儿山岩体稀土元素配分模式为右倾型,轻稀土较重稀土富集;两个岩体均富集Rb、K,Ba、Nb、Ta、Sr、Ti、P、Ho、Er、U、Eu等元素出现不同程度的亏损。地球化学特征分析显示上营北岩体和帽儿山岩体均为A_2型花岗岩,为后造山型花岗岩,形成于兴蒙造山带后造山的伸展环境。  相似文献   

西藏甲玛矿床南坑高分异Ⅰ型花岗斑岩及黑云母矿物学特征     

陈国良  张忠坤  孙渺  林彬  赫健  唐攀  格桑顿珠  苏贵喆  任绍渊  胡海涛 《矿物岩石地球化学通报》2021,40(2):411-424

高硅花岗岩对于理解浅部岩浆房的行为具有重要意义。本文对西藏甲玛矿区南坑矿段的花岗斑岩开展了岩相学、岩石地球化学及黑云母矿物学研究。结果显示,该花岗斑岩具有高SiO2(73.39%~77.99%)、高K2O(4.34%~6.45%)和低P2O5(0.03%~0.06%)特征,铝饱和指数为0.97~0.98,富集Rb、Th、U和Pb,明显亏损Ba、Nb、Ta、Sr、P、Ti和Eu等,属准铝质高分异I型花岗岩类;其中的黑云母具有高Al2O3(9.87%~10.92%)、高MgO(13.38%~14.64%)、高F(0.56%~1.11%)和高Cl(0.07%~0.12%)特征,Mg#为0.61~0.63,属镁质黑云母,黑云母源区为壳幔混合源。研究认为,该区花岗斑岩可能为甲玛矿区浅部埃达克质二长花岗斑岩的岩浆经矿物结晶分异演化出高硅残余熔体,并以岩脉形式上侵就位,而残留在岩浆房的物质结晶形成似斑状二长花岗岩,二者构成互补的关系,即主体为似斑状二长花岗岩,补体为高分异花岗斑岩。  相似文献   

Study on scattering wave force of horizontal and vertical plate type breakwaters   总被引：1，自引：0，他引：1  

王科  张犀  高鑫 《中国海洋工程》2011,25(4):699-708

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method,and the relations of wave exciting force with plate thickness,submergence and length are obtained.It is found that:1) The efficient wave exciting force exists while plate submergence is less than 0.5 m,and the plate is very thin with order O(0.005 m).2) The maximum heave wave exciting force exists,and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored.3) The maximum sway wave exciting force exists,it is the main factor for surface or submerged vertical plate,and the roll force is about 20 times of horizontal plate.  相似文献